I am running a Windows 2003 R2 Server with RS Bizware, Historian, and Plantmetric installed. I've got a basic report setup. I created four device short cuts in Factory Talk. Two of them are Compact Logix One is a ML11000 and the last one is a pain in the rump... A SLC 5/03 connected DF1, to a NET-ENI module. I had the connection to the SLC 5/03 this morning, but I've lost it...and now I can seem to get Historian to see the device short cut I've created. I've got the device short cut created in Factory Talk, and it point to "holding and highlighting" the NET-ENI module ICON, but when I got into Historian, I only see THREE PLCs, instead of FOUR that I created in Factory Talk. Is there some issue with RS Enterprise not able to talk to a NET-ENI ? SLC 5/03? I had it working this morning, then now it's gone. I've rebooted the servers twice, rebooted the NET -ENI. I can browse the NET -ENI using internet explorer, I can PING the NET -ENI, I can go online with the SLC 5/03 using RS Linx Classic, and RS 500...but for whatever reason, I've got that short cut created in Factory Talk under RS Enterprize, and Historian nor Plantmetric can see or will allow me to drill down into the PLC like it does for the Compact Logix PLCs. I can configure tags to the TWO compact Logix, and the ONE ML1100, no problems... What gives? I can get some screen shots maybe tomorrow.
↧