I am using a Studio 5000 V29 to program a 1769-L18ER-BB1B PLC, part of the program involves feedback from an encoder which is connected to a 1734 VHSC24/C point I/O card.
I've download to the PLC configured the I/O and updated firmware and EDS files, the PLC is running without any errors and the VHSC card has two green light lit .
But when I look in the Controller Tags for the project none of the registers for the VHSC card are change when the encoder is rotating.
I have never use this point I/O card before so have no experience configuring and coding , Do I have to use the GET command to retrieve #101?
