Hi All
I have a problem using the tag based alarms on studio 5000 V32.
PLC is a Compactlogix 5380 (V32)
HMI is Panelview 5310 (V5)
I have used these on another system with the same components and they worked great with no issues.
On this particular system however i am unable to read the alarm message in the "alarm summary" or "alarm manager" page on the HMI.
The column is there and i know how to add and delete the columns i require and don't need.
All other data can be read such as alarm name, time, severity, Alarm state image ect but under the Alarm messages column it is just blank.
I have tried increasing the size of the column for the Alarm messages as well as shortening the message to just a single letter and i still can't see it.
I have tried adding the HMI to the IO tree.
i have tried using the medium sized alarm summary instead of the large.
What confuses me the most is i have a made similar system and its running perfectly and from what i can see this should too as it seems to be all the same.
I was hoping someone may point me in a direction to look toward or maybe some one has had a similar problem before.
Trevor