Hi Guys I need a little help with a message that i am trying to set up in a controllogix PLC to read data from a PLC-5 via ethernet and DH+ We have our PLC's on an ethernet network for remote comms (laptop+wifi). From one of the PLC chassis' on the network we have a DH/RIO card that has a number of PLC-5's connected on DH+. I've read that it is possible to read/write data to/from one of the PLC 5's to one of the Logix PLC's through the ethernet and DH+ networks. I've had a stab at setting up a MSG in one of the Logix to read from a PLC-5. However, i cant seem to get the comms path right to access my PLC-5. If anyone can help i will be most grateful. The detail that i have is as follows: ENBT/A -slot 5 of PLC with MSG (10.60.28.97) ENBT/A - slot 1 of "bridge" PLC (10.60.28.60) DH/RIO - slot 2 of "bridge" PLC Node 67 - target PLC-5 Channel A If any more information is required, just ask Thanks Steve
↧